Deep Groove Ball Bearing

This bearing consists of inner and outer rings with deep symmetrical ball race, separator and complement of Balls. This beading is designed primarily for radial load but due to it's design features it is capable of carrying equal amount of thrust (axial) load in either direction and is capable of operating at high speed too. Different clearances allow a relative misalignment of inner ring and ourter ring from 8' to 16'

This bearing has the lowest frictional losses and therefore, it is broadly used in machinery industry such as precision meter, low noise electric motor, transmission shaft of textile machinery, mining machinery, medical equipment and other general machinery.

Types :

 ZWA supplies following categories of Deep Groove Ball Bearing currently :
1.Single-row Deep Groove Ball Bearings
2.Single-row Deep Groove Ball Bearings with shield(s)

3.Single-row Deep Groove Ball Bearing with seal(s)

4.Single-row Deep Groove Ball Bearing with snap groove or snap ring on outer ring

Demension Range :

 The basic dimension of deep groove ball bearing supplied by ZWA are listed as followed,
    Demension range of bore diameter : 100mm-1320mm
    Demension range of outer diameter: 125mm-1600mm
    Demension range of overall width diameter:13mm-300mm

Application :

1. Automobile

2. Motor

3. Mining

4.Construction Machines